Something Different

My camera is on the blink AGAIN! Third time in 18 months. Awaiting response from Olympus about returning it.
Only managed to take a couple of photos of my improvisation today, too frustrating with the camera going 'Ping' and displaying 'Zoom Error' and resetting, even when I'm not zooming.

Because I've bought cheap indicators off ebay the front ones aren't long enough to stick out of the fairing.
I'm trying some square tubing with a bolt forced into the end and soldered (I haven't got the welder) and I'll use that epoxy steel stuff to fill it in. Soldering bolts and tubing is not easy but I have a small gas blowlamp that heated both up considerably and the solder flowed very easily, with no flame on it, around the bolt. I can't fill the gaps though as the solder that has held would melt while I was trying fill them.

Next is to get the front indicators back off the bike to see what I can do at the other end. I need to extend them by about 4 inches I guess. I'll put one side fairing on to check that though before I cut the square tubing.